UltraSky: a bright idea

Installed on a new build extension, Orangery, or inserted into an existing flat roof, an UltraSky rooflight will help you add the feeling of space and natural light to your home.

ultrasky

  • Rectangular double ended rooflights, with a width from 1000-2000*mm and a length from 1500-4000*mm.

  • Thermally broken aluminium ridge body.

  • 25 degree fixed pitch to all four sides.

  • Glazing bar top caps in either chambered PVC (white only) or aluminium (White RAL 9003 80% gloss, Anthracite Grey RAL 7016 30% gloss and Satin Black RAL 9005 60% gloss).

  • Low profile eaves beam (no gutter) designed to be fitted with oversailing 24mm double glazed units (high performance low e, self cleaning and solar control in blue or neutral/clear - units can be supplied with the rooflight).

  • UltraSky is designed around maximum uninterrupted sight lines – bar numbers are reduced (or can be added if you prefer) and the ridge board and hub ends are as unobtrusive as possible.

  • The thermal performance has been optimised to make it suitable for extensions in domestic properties. Typical U value with 1.1 glass for a 1000mm wide x 2000mm long rooflight is 1.4 W/m2K.

    *Width and length are defined as to the external face of the timber kerb (not supplied, recommended to be 150mm high x minimum of 70mm wide).

UltraSky is based on the tried and tested BBA approved Ultraframe Classic roofing system

ultrasky

 

Download our Ultrasky Brochure

 

 

From traditional to contemporary - Serving Shropshire and Mid Wales for over 30 years