Search (A - K):
Ally: Aluminium.
Anti lift Device: A device usually fitted on sliding patios or double doors, and fitted over an opening sash in-between the sash and frame profile.
Anti Sun Glass: A range of low to medium performance tinted glass, designed to reduce heat gain. The solar control properties and colour densities can vary depending on thickness. Available in Blue, Bronze, Green and Grey tints.
Annealed Glass: Standard glass (not safety glass).
Armoured Cylinder: A high security cylinder that is protects against drill attack.
Austrian Bar: Thin aluminium roll formed bar that is inserted between the two panes of a sealed unit to give a leaded glass effect. Easier to clean than leaded windows. Usually available in white, gold, bronze and grey.
Automatic Deadlocking: A small auxiliary bolt situated next to the main bolt that hits a striking plate or staple and is pushed in every time the door is closed. This action automatically holds the main bolt in the locked position.
Backplate: The plate, fixed on a door, to which the moving parts of a lock or latch are attached.
Bay Window: Bay windows are internally recessed and form an angled projection from the building that rises up from the ground on the first floor. A Canted Bay Window has straight front and angled sides.
Bead:
The section designed to secure the double glazed unit in place.
Bow Window: Bow windows are rounded projections, often formed of the window glass itself.
Casement Window: Traditional outward opening window
Cat Flaps: Can be fitted at the time of manufacture
Child Restrictors: Attachments to large openers preventing them being opened far enough for a young child to climb or fall out. They can easily be disabled by an adult to allow the window to fully open but in truth, should only be considered toddler proof.
Cill (Sill): A window will normally have two cills, one internally usually referred to as the window board and one external one. The function of the external cill is to disperse water that has run down a window.
Claw bolt: A type of deadbolt having claws that swing out sideways when the bolt is shot. These locks are usually fixed to sliding doors.
Deadlock: A single bolt mortice lock, which can be used in addition to a standard cylinder rim lock on the front door.
Deadlocking: On cylinder rim locks with this function, when you leave the house and close the door, you insert the key in the cylinder lock and turn anti-clockwise. This deadlocks the bolt and stops it from being pushed back.
Delayed Action: A door closer that holds the door in the open position for a number of seconds before the closing action commences. This is ideal for use by the handicapped, the aged and people with prams, trolleys etc.
Desiccant: Desiccant is moisture-absorbing beads that fill the spacer bar within the construction of the double glazed unit. The desiccant will absorb any trapped organic moisture or vapour that may cause condensation between the panes of glass at a later date.
Door restrictors: Used for outward opening doors to prevent them slamming shut in windy conditions
Dormer windows: Windows that are usually set upright in a sloping roof. They require extra trims or liners around the outside
Double locking: The means by which the latchbolt on a cylinder rim lock is deadlocked. Upon leaving the house you insert the key in the outside cylinder and turn anti clockwise. This locks the inside handle rendering it unopenable until the key is reinserted into the outside cylinder and so preventing unauthorised entry by someone breaking adjacent glass, reaching in and turning the handle.
Double Glazed: see sealed units
Dual Seal: Dual seal is a black butyl rubber based hot melt compound that is specifically designed for the use as a primary seal and spacer bar adhesive in the construction of insulated glass units.The sealant is applied at high temperature to the spacer bar by using hot melt extrusion equipment, and then the spacer bar is applied to the two leaves of glass. To complete the construction of the unit a two part fast curing polyurethane compound specifically designed as an edge sealant is applied to the perimeter of the insulating glass unit.
Espagnollette: A device, which is fitted to the sash (opening window) and is operated via the handle to lock the window.
Face Plate: A strip of metal fixed to the outer edge of a mortice lock, which fits flush with the door edge.
Fire Escape Hinges: These allow windows to open further than conventional friction hinges and therefore provide a better means of fire escape.
Fixed Unit/Fixed Light: A non-opening window.
Flag Hinge: A type of door hinge that is surface mounted and offers horizontal and vertical adjustment.
Frame Fixings: A device for fixing the frame of any type of door or window to the fabric of the building.
Georgian Bar: A grid system designed to look like a traditional Georgian window but that is easier to clean. It is normally made of roll formed aluminium and painted white, although a variety of colours are available including wood grain in various shades. The bars sit between the 2 panes of glass in the double glazed unit.
Glazing Gasket: This is normally a rubber gasket that sits between the glass and any uPVC or aluminium components.
Head: The top of a window or door.
Handle: This operates the locking device to secure the window via the Espagnolette. Locking and non-locking types are available.
Insulated Glass Units: see sealed units
Jamb: The vertical component of a doorframe
K-glass: Manufactured by Pilkington with an almost invisible coating on the inside of the inner pane to reduce heat loss through the window. A brand name for low-e glass.